Healtech Speedo Healer V4 Fitted to a C50

Discussion in 'Tech Talk' started by ChuckT, May 20, 2020.

  1. ChuckT
    Offline

    ChuckT Member

    Joined:
    Feb 2, 2020
    Messages:
    9
    Likes Received:
    58
    State:
    South Australia
    Hi all just wondered if anyone has fitted a Healtech Speedo Healer V4 to their C50? If so did you have to do the connections inside the headlight as thats where the speedometer wires are?
  2. ottafish
    Offline

    ottafish Member

    Joined:
    Jan 13, 2017
    Messages:
    1,531
    Likes Received:
    2,671
    Location:
    Melbourne / Ballarat
    State:
    VIctoria
    I'm not an expert, but normally with these types of things, the connection for a speedo healer would connect in line with the speedo sensor which is down in the motor / transmission area. That's where I've connected 3 of these things before to different bikes. If you're cable driven speedo, then you're in da poo ....
  3. ChuckT
    Offline

    ChuckT Member

    Joined:
    Feb 2, 2020
    Messages:
    9
    Likes Received:
    58
    State:
    South Australia
    Yes i have done a bit more research and we are cable from the front wheel, but its electronic and the plug is in the headlight, so by the looks of it i connect it in there!

    Cheers Chuck
    JR and ottafish like this.